Screw

Screw



Screw
FOr our purposes today we will assume that most people knoe what a Screw is and is used for and what they look like and what the tool is called the DRIVER and what they look like there is several heads not just them straight ones. For now this is not a discussion of the Philips or the Cross. The reason eye have called all of you today together is the Screw. The way to use one. The very way to putt one in the slot the hole the board or wall. Someone has to make the HOW TO SCREW a screw manual of arms. ASSUMing you have the things you need to start. Take the DRIVER in your hand grasp the shaft firmly so your hand will not slip up or down too much when screwing. Take a small hammer and tap the screw to get it started. This takes patience and a good eye. You may be attempted to hammer the screw all the way down when you see it turning with every blow. However there is that risk. After you start your screw take the Driver well in hand and make sure its centered in the slot atop the screw and flushed. Begin to turn the screw and keep twisting the Driver do not unhand the driver but move the Driver back and forth. You can also go complete around and start over with anothor hasty grip the Driver find the slot and flush it up. Twist and turn and twist the thing. When you are almost there to the end just keep going. Its too late to think of everything so just make the screw flat against the objection you are screwing. Repeat this responsive meditation as many times as necessary to add several more screws to this one. Screw one screw two its all in how you screw.